Basic Info.
Funtion
Teaching Purpose for Universities
Transport Package
Plywood Box
Specification
aluminum structure
Product Description
AFH013 Transparent Hydraulic Training Equipment Teaching Equipment Didactic Equipment Educational Equipment1. Structure introduction
This system adopts transparent hydraulic component, combined aluminum groove structure, mobile oil-way contact, universal electrical circuit, according to use the equipped tools and refer to the experiment instructor, student can conveniently carry out various common control, experiment and test of hydraulic transmission. It can make the student or engineers understand the internal principle, structure and working processing of oil-way and hydraulic. It is the essential instrument of hydraulic transmission teaching and hand on training.
Boundary dimension: 150Cm ( length) ×70Cm ( width )×170Cm( height)
Electrical control component composition
It is mainly consist of power supply portion, oil-way protection unit, experiment bench protection unit, relay control unit, button and other control component.
Electrical control component introduction
2.Replay control unit
Relay control unit, its function is the same as electrical control system basic control function. It is consist of control power supply hanging box, button hanging box, replay indicator light hanging box.
Relay control system include two independent control mode, when the operator use the mode one, press the "reversing" or " normally open starting" , it will has signal ( travel switch NO(NO=normally open) contact will close), then the " output " of corresponding solenoid valve group one will output, corresponding output indicator light up. Press the "reversing" or " NC(NC=normally close) stopping" , it will has signal ( travel switch NC(NC=normally close) contact open), then the " output " of corresponding solenoid valve group one will output, corresponding output indicator light up, at the same time, "output " will stop the output, the output indicator light will turn off, that is " output " and " output " are interlocking. It is mainly because of the two magnet of double solenoid directional valve can't power on at the same time ( remark: the two electromagnet of double solenoid directional valve must connect to the " output " and " output " of the same solenoid valve group), press the " stop button" or "NC(NC=normally close) stopping" it will have signal, then the " output " and " output " will stop output.
The control mode of group two is same as the above description.
When the operator using the control system, operator only need to power on the power supply, connect the input and output to corresponding location, the equipment will carry out control operation.
3. Oil pump motor and regulator circuit
1. Function introduction
Due to the experiment workbench can demonstrate various oil circuit, it has features like wide pressure range of circuit and requiring different flow and so on, therefore, in order to fully meet requirements of experiment demonstration, oil pump driving motor adopts small size DC shunt excitation motor and speed controller of DC motor.
Notice and warning
1. You must prepare at least 30L hydraulic oil, and open the rotary cap in hydraulic station, fill in hydraulic oil into hydraulic pump station, until hydraulic oil is full. Our hydraulic station is 25L, but considering hydraulic oil will go into components, and during experiment, hydraulic oil will be consumed, so we advice you buy 30 L. You can choose No.32 hydraulic oil, or less standard, such as No. 12, due to it's not industrial use, the friction is small when do demonstration.
2. When start oil pump motor, you should turn the speed governing rotary knob of motor speed controller to the slowest position, then press start button. Then turn the speed controller to required rotate speed or working pressure of oil-way.
3. It is forbidden to start oil motor and run in high speed when gear pump, oil sucking pipe and oil tank are under condition of no hydraulic oil.
4. Before start oil pump motor, you should check and confirm if experiment oil-way is connected correctly, and check if there is oil leak phenomenon.
5.After everything is correct, you can start experiment. For the first experiment, due to hydraulic components will fill in oil, it may lead to hydraulic pump lack of hydraulic oil, when hydraulic pressure is low, you can check and add hydraulic oil.
6.There is a glass window in hydraulic station, when you can't see oil in that window, you must add hydraulic oil. Forbid to add hydraulic oil during equipment running, hydraulic oil temperature maybe high, may hurt people. You must wait hydraulic oil temperature cooled, then add oil.
ServiceWe supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | AirFresh, Air Ya |
8 | Production time | From 10 days to 60 days according to different items |
We have other laboratory as below
Electrical laboratory equipment,such as
PLC training workbench, transformer training workbench,
AC machine training equipment,
DC motor trainer kit Mechatronics training equipment, such as
mechatronics training system modular product system 9 stations, robot arm trainer,
PLC electro pneumatic trainer,
electro hydraulic trainerThermal lab equipmentRefrigeration and air conditioning training equipment PCB lab equipment
Food Machine Trainer
Address:
No. 47 Peach Road, Lixia District, Jinan, Shandong, China
Business Type:
Trading Company
Business Range:
Consumer Electronics, Electrical & Electronics, Furniture, Light Industry & Daily Use, Office Supplies, Packaging & Printing
Company Introduction:
Shandong AirFresh Intelligent Technology Co., Ltd. is a manufacturer and trader in the research, development, production and sale of educational equipment. We are located in Jinan with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
We can supply first rate Products and Services to more than 100 countries in the world, Such as Thailand, Philippines, Korea, Japan, Malaysia, Indonesia, Dubai, USA, UK, Spain, Swiss, France etc. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.